I have a 2019 zforce 500 trail and bought the turn signal kit for it. They said it was plug and play but it's not playing lol. I have 12v at the switch but no voltage at the any of the signals. anyone have experience or the same issue?

My '17 was plug and play. Could not have been easier.

Just wondering if you plugged the switch into the correct harness plug. (Mine had several unused harness plugs under the dash)

Also, did you confirm that the directional relay is installed?

[2015 Z Force 800 53/Trail EPS]

My '17 was plug and play. Could not have been easier.

Just wondering if you plugged the switch into the correct harness plug. (Mine had several unused harness plugs under the dash)

Also, did you confirm that the directional relay is installed?

Agreed-without the relay there will be no power or flashing at the lights.

I didn't get a flasher relay with the kit. What the part # for that?

[2015 Z Force 800 53/Trail EPS]

I didn't get a flasher relay with the kit. What the part # for that?

Need to check if it has it or not first. Some did...some didn't.  The # is 4020-150340. It's not with the other relays, its somewhere center-dash close to the switches. Just an open connector in the harness if not there.

Would it be obvious to spot

Need to check if it has it or not first. Some did...some didn't.  The # is 4020-150340. It's not with the other relays, its somewhere center-dash close to the switches. Just an open connector in the harness if not there.
[/quote]

So here an update; the switch they gave me which was a 3 pin connector was wrong and also the machine didn't have a flasher relay already either. Thatnk for the info and help. Cheers