I just unplugged the harness from the seat belt and no lights or limiting. Just put the plug in a bag and tapped it sealed to keep water and mud out of it. Love the 4 point harness way better.

You have a link or website of where you found the materials? Be a good project over the winter when its not being used. Can really tear it down to get into all those spots.

Since the uforce 1000 and the 950 sport show that same part number for the front a-arms. Have you tested if the high clearance a-arms you sell for the uforce 1000 will fit a 950 sport? I know the rear is completely different but little extra clearance in the front would be nice to get over an obstacle then let skid slide over the rest.

Will it lay flat to the cage and be able to lock with side mirrors installed? The cage mount for the side mirrors wont let the full glass lay flat. So wondering it side mirror cut out are an idea so the windshield will lay flat to the cage. If you check out justin the creator on youtube, he had this issue with his 3 star and they now do cut outs.

Has anyone tried their flip out windshield for the 950?

Exhaust for the 950 none the 800 there is a couple. As for items for the 950 look up justin the creator on youtube. He has alot of videos on his.

https://cfmotousaparts.com
Has kits for each type. Just ordered a full service kit for my 950.

It was good. Extremely muddy even the basic trails. Justin is, look up justin the creator on youtube he posted the event video and alot of others videos on the 950. Im from WV.  The pic is my tire about 50 yards into the trails and didnt get better lol.

Next weekend going to mud and mayhem in bedford Indiana. Its an event put on by a youtuber justin who does lot of cfmoto 950 videos. Anyone close or going lwt me know going with just me and my wife with my 950 and wouls like a group to ride with.

Slides are good all 8 pads are same thickness, just some are realy grooved. The pad material seems soft. Where on the peddle are you talking to check?

Does anyone know of there are upgraded brakes for the 950? Took mine apart this weekend and they are bad for only having 125 miles on them. 

Getting ready to add a bilge blower to my clutch inlet hose.
4" diameter blower blows 240 cfm.
My inlet tube is approx. 4" so I'm going to use 4" rubber plumbing couplings with hose clamps to install.
I will run it off a separate dash switch so I can turn off if desired!
I will do photos when completed. Saturday I hope!
https://imgur.com/ORP9j7b

DSTREEKER, did u remove the tube and cut it or cut it in place? Also what kind of connectors did u use? All the 4 inch connectors i can find at home supply stores are about 1in to big and 3 inch wont fit, and they have no 3.5 inch.

Does this include the 1/4 or 1/2 windshield to need the rear also?

Mine are 32x10x14 all the way around and no fitment issues. Good thing about same size can rotate them like a car and one spare can be used on any corner.

Another view