the trans seems fine with the clutch sitting on the shaft it will move the rear wheels when turned
there is a minimal thickness need for the belt to operate correctly.
so i guess i should of said it would try to move a high RPMs but not well
mike glidden

good evening,
we have a C6 wheeler, it stopped moving in any direction, i removed and inspected the clutches and can't find any thing wrong there.
the belt is moving fine but the only thing i can think of is the belt is out of spec and not letting it move.
i also need a link to the Manuel i can't down load the manual
thanks Mike

FIX!!
i want to thank you guys for helping!!
so long store shortened, the ECU had no power to it, i traced it back to a larger electrical connection down by the ECU. I found a green and nasty wire terminal that had rusted off.
i made the repair and all is well now.
MIKE

800 u force,
that is exactly where i am headed but it will have to be the weekend before i get to it.
a thought i am having is that it might be a crank sensor not giving the ecu a command to start but i must try the grounds and powers to the ECU first.
mike
ps thanks for helping i have no support up here in Alaksa

so there is no MIL light on,
i have traced the fuel pump circuit to the relay, the relay is not getting the trigger from the ECU.
i have checked fuses and power at the little fuse panel and seem to be good there.
i just down loaded the wiring diagram and will be checking fourth later this weekend.
i was told the crank sensor is part of the stater, is this true?
mike

I have a 2015 u force that will crank but not start. i am a mechanic and have checked fuses and etc.
i know for sure the ecu is not running the fuel pump, and it doesn't seem to be firing either.
i know something is triggering the ecu to run but i can't find a cam or crank sensor on the unit or in the parts diagram.
it was fine, i was plowing snow, i went in to warm up came back out and it wont run.
any help would be great
the dealer up here in alaska closed and we have no service or anyone who wants to look at the cfmoto
mike

I have own a cf side by side 800 for over a year now and it has handled anything I have thrown at it.
only wish i could raise it up off the ground more, but they only have 2 inch lifts right now
mike