Zforce motor Vs can am outlander motor

Started by thewind60, April 01, 2016, 10:36:07 AM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic
Go Down Pages1
User actions

thewind60

Guest
Logged
thewind60
Guest
April 01, 2016, 10:36:07 AM
hi
i saw that the CF moto is look almost the same as the can am outlander motor.
anyone can tell if the motor are similar? are the parts from the Can-Am can fit the CF?
Thx!

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
April 01, 2016, 10:46:37 AM Last Edit: April 06, 2016, 08:47:52 AM by NMKawierider
#1
Quote from: thewind60 on April 01, 2016, 10:36:07 AM
hi
i saw that the CF moto is look almost the same as the can am outlander motor.
anyone can tell if the motor are similar? are the parts from the Can-Am can fit the CF?
Thx!

The basic design was a copy of the Rotax 800 but many little changes makes most parts not work in it. Others will chime in to confirm though.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

emersonsc

Guest
Logged
emersonsc
Guest
April 06, 2016, 08:44:33 AM
#2
Connecting rods on the CanAm are shorter. Wrist Pins on the CanAm are smaller. Pistons are different. Crankshafts are different (this is mostly to do with CFMoto using a wet-clutch system). Then the cases are modified to house the wet clutch itself.

They are similar, but very different at the same time.
Go Up Pages1
User actions