[cfmoto]

Took the uforce 500 out for a spin with the wife driving.  Some snow but mostly frozen fields.  The ride was brutal !  Is anyone running tires under inflated from dealer specs to improve the ride....pros- cons ? Thanks 

[NMKawierider]

All these should be between 7 and 12PSI depending on the need. I run mine at 8-8.5psi. What's printed on the tire is max sustained pressure and bead setting pressure (about 30psi) but for normal riding they are just slightly higher then an ATV.

[glenlivet]

Stock suggested pressures are teeth jarring. I run 6 and 7 and it's much better.

[NMKawierider]

Stock suggested pressures are teeth jarring. I run 6 and 7 and it's much better.

Yeah the only reason I stay above 7 is that once at 7psi I slipped-off the side of a hole and when it impacted on the bottom it popped both beads on that side. These factory wheels fit tire beads so loosely...at least on mine...that I can let the air out and just push down and slide the bead right off where it takes my tire machine and lots of choice words on other wheels. When I replace these wheels and tires I will be able to go as low as I want. In the meantime its 7.5-9psi depending on conditions.

[cfmoto]

Thanks guys, appreciate the help

[gss200881]

I run 8.5