[wayne gulliver]

With less than 3000km on my Z Force 500,both rear wheel bearings are worn out?  Does anyone know the size or number of these bearings?  I am not putting original Chinese bearings back in. The 1 year warranty ended a few months ago

[NMKawierider]

When mine go I'll just going to take them down to my local bearing supplier and have them matched-up with either Timpken or Nationals. And I suspect with my wheel spacers that won't be too long for these Chinese bearings.

[Cosmosdan]

Make sure the play isn't from the a arm bushings

[chuddly]

I have not ordered mine yet but from what im told these are the bearings for front and rear.  Rears are the wider ones and if I remember right each corner takes 2 bearings so a total of 8 bearings need ordered if your doing all 4 corners.
https://www.aliexpress.com/item/4pcs-DAC3063W-30X63X42-DAC30630042-DAC3063W-1-9036930044-574790-DAC3063W-1CS44-Hub-Rear-Wheel-Bearing-Auto-Bearing/32733616718.html?scm=1007.13339.60109.0&pvid=ced82701-7c8f-4c45-a9e7-e06275dd6fd5&tpp=1
https://www.aliexpress.com/item/2pcs-MOCHU-DAC3055W-DAC30550032-30x55x32-DAC3055-ATV-UTV-Car-Bearing-Auto-Wheel-Hub-Bearing-ATV-Wheel/32569382361.html?spm=2114.01010208.3.53.VQKu7w&ws_ab_test=searchweb0_0,searchweb201602_1_10152_10065_10151_10068_10130_10136_10137_10060_10138_10155_10062_10156_10154_10056_10055_10054_10059_10099_10103_10102_10096_10148_10147_10052_10053_10142_10107_10050_10051_10084_10083_10080_10082_10081_10178_10110_10111_10112_10113_10114_10181_10182_10078_10079_10073_10070_10123_10124,searchweb201603_9,ppcSwitch_7&btsid=b5c2c829-ff4f-402a-adce-350ce066a575&algo_expid=1e6ea850-4b77-4cf8-8e54-334963f6c1e4-7&algo_pvid=1e6ea850-4b77-4cf8-8e54-334963f6c1e4

[chuddly]

I also wanted to add that the shipping on that sight is HORRIBLE to us in the US.  like $50 shipping on $50 in parts.  They can be found on ebay also if I remember right

[Red z8]

Part number from my research should be 513022.its a mooge bearing number.you can get them at any local carquest auto parts or advance auto parts store. There about 44.28 plus tax each.easy to get

[Red z8]

.....and there limited life time warranty.I work at a carquest..if your store doesn't have them you can usually get them within a day

[bezerk1]

Each wheel only has 1 bearing. When I replaced mine I could not cross reference the correct one.  The bearing size was not the issue, it was the seals in the bearing that were the problem.  I would be nice to run to a local parts house and pick up a bearing if needed.

http://cfmoto-forum.com/how-to's/z6-z8-rear-wheel-bearing-part-numbers/msg8597/#msg8597
Here is a link I posted a while ago with some info in it.  They Koyo bearing did not work.  I ended up throwing it out.  $50 dollar lesson learned.

[Cosmosdan]

I had problems finding some too with the seals. No seal, won't last very long. Try Timken 513022. These look like they have them. I lost my dimensions, so maybe someone else can confirm this.

[bezerk1]

Here are some specs of that bearing.  It states that its fully sealed.  I think you may have found it.



Bearing Seal Configuration: Fully Sealed
Inner Race Bore Diameter (in): 1.1811
Inner Race Material: Steel
Inner Race Width (in): 1.6535
Interchange Part Number: GRW166, 513022, WH513022, 051-3933, FV3022
Internet Product Code (IPC): B2CD3AF0BD2
MFG Model # (Series): 513022
Other Part Number: 513022.00, WB513022, 1410-45482
Outer Race Material: Steel
Outer Race Outside Diameter (in): 2.48
Outer Race Width (in): 1.6535
Pre-Lubricated: Yes
Product Description - Invoice - 40: Ball Angular Contact Double Row
Rolling Element Cage Material: Steel
Rolling Element Material: Steel
Rolling Element Rows: Double
Supplier Company Name: Timken

[Cosmosdan]

So the dimensions match up? If so Sweet...............

[Cosmosdan]

I found the bearing on amazon. The pic shows it open. I ask if it is a sealed bearing and get a no, not sealed. This is frustrating.......

[Cosmosdan]

OK, hear we go. There is a real picture of these and there is a seal. At the price they are, might be worth a try.

http://www.ebay.com/itm/2x-85-91-Toyota-Camry-87-93-Celica-90-91-ES250-91-95-MR2-Rear-Wheel-Bearing-Pair-/172185028017?hash=item28170705b1:g:LG0AAOSwSypZANVk&vxp=mtr

Not sure if this has the right size fittings, but I used a kit like this on polaris bearings and works great.

http://www.ebay.com/itm/FWD-Front-Wheel-Drive-Bearing-Removal-Adapter-Puller-Pulley-Tool-Kit-US-Shipping-/262801240014?hash=item3d302cafce:g:UhcAAOSwrnNXP9Ip

[bezerk1]

Can you confirm that they are sealed on both sides?  I would go to an auto parts store and look at the seals before I ordered. I feel your pain.  I looked for a week an came up empty handed.  You can use a brass punch to knock the old bearing out of the knuckle.  To reinstall, freeze the the bearing and heat the knuckle, it will drop right in.

[chuddly]

I dont know about "drop right in" LOL i just replaced one wheel bearing in the front last night and I had the bearing frozen and the hub heated.  Still a 3lb sledge was needed to get it in.  I had to use that same 3lb sledge and a steel punch and swing that thing for about 40 min to drive the old one out.  A brass punch would have been a small ball of goo at that point.