2007 500 Side by Side Wheel Bearing

Started by Dynocon, November 26, 2020, 08:21:28 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

Dynocon

Guest
Logged
Dynocon
Guest
I have a bad front wheel bearing. I have looked on several sites and they are discontinued, any ideas on where to find one?

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Quote from: Dynocon on November 26, 2020, 08:21:28 PM
I have a bad front wheel bearing. I have looked on several sites and they are discontinued, any ideas on where to find one?
Assuming it was a Rancher 500 as they were the only SxS CFM made back it 2007, Alpha-Sports.com still shows the bearing(s) available. PN  30400-03080 and it takes two of then for each wheel. About 26 bucks each.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Dynocon

Guest
Logged
Dynocon
Guest
It is a side by side made by xy-xingyang Motors so I am not sure if it is the same or not.


NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Most likely not. Might have better luck on a forum that represents that brand...if there is one.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Workhardplayhard

****
Senior Member
Posts: 152
Logged
Workhardplayhard
Senior MemberPosts: 152
You may need to remove them and order replacements by size and style.

Quote from: Dynocon on November 27, 2020, 08:49:44 AM
It is a side by side made by xy-xingyang Motors so I am not sure if it is the same or not.
🇨🇱 2016 Cforce 500 HO