« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline Dynocon

2007 500 Side by Side Wheel Bearing
« on: November 26, 2020, 08:21:28 PM »
I have a bad front wheel bearing. I have looked on several sites and they are discontinued, any ideas on where to find one?
Logged
*

Offline NMKawierider

Re: 2007 500 Side by Side Wheel Bearing
« Reply #1 on: November 26, 2020, 10:11:07 PM »
Quote from: Dynocon on November 26, 2020, 08:21:28 PM
I have a bad front wheel bearing. I have looked on several sites and they are discontinued, any ideas on where to find one?
Assuming it was a Rancher 500 as they were the only SxS CFM made back it 2007, Alpha-Sports.com still shows the bearing(s) available. PN  30400-03080 and it takes two of then for each wheel. About 26 bucks each.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Dynocon

Re: 2007 500 Side by Side Wheel Bearing
« Reply #2 on: November 27, 2020, 08:49:44 AM »
It is a side by side made by xy-xingyang Motors so I am not sure if it is the same or not.

Logged
*

Offline NMKawierider

Re: 2007 500 Side by Side Wheel Bearing
« Reply #3 on: November 27, 2020, 10:21:14 AM »
Most likely not. Might have better luck on a forum that represents that brand...if there is one.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Workhardplayhard

Re: 2007 500 Side by Side Wheel Bearing
« Reply #4 on: November 29, 2020, 01:20:15 PM »
You may need to remove them and order replacements by size and style.

Quote from: Dynocon on November 27, 2020, 08:49:44 AM
It is a side by side made by xy-xingyang Motors so I am not sure if it is the same or not.
Logged
🇨🇱 2016 Cforce 500 HO
Pages: [1]   Go Up
« previous next »