0 Members and 1 Guest are viewing this topic.

*

Offline Barrycuda

2013 Cforce 500 Indicator light constant flash
« on: March 02, 2024, 07:53:06 PM »
Atv had been running poorly for a long time running very rich black smoke out of exhaust, hard to start spark plug fouling all the time.  Long story short I found that the dealer did not hook up the hose to the temperature pressure sensor when they had it in for some other service. After I hooked up the hose it runs great.. However now the indicator light is constantly flashing, no pattern no break it just flashes.  When you first start it thr indicator is not on, it starts flashing after 5min or so.  I replaced the spark plug, O2 sensor, Temperature pressure sensor and the injector (it was leaking).  Like I said it runs great just that stupid light.  Might just put tape over it and call it good

*

Offline murdo

Re: 2013 Cforce 500 Indicator light constant flash
« Reply #1 on: March 04, 2024, 11:18:18 PM »
Or remove the bulb.

*

Offline NMKawierider

Re: 2013 Cforce 500 Indicator light constant flash
« Reply #2 on: March 05, 2024, 09:16:21 AM »
It's trying to tell you there is an error somewhere. You apparently will need a code reader to find it. Might be worth a trip to the dealership.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube