CFMoto-Forum

CForce => CForce 500 => Topic started by: Barrycuda on March 02, 2024, 07:53:06 PM

Title: 2013 Cforce 500 Indicator light constant flash
Post by: Barrycuda on March 02, 2024, 07:53:06 PM

Atv had been running poorly for a long time running very rich black smoke out of exhaust, hard to start spark plug fouling all the time.  Long story short I found that the dealer did not hook up the hose to the temperature pressure sensor when they had it in for some other service. After I hooked up the hose it runs great.. However now the indicator light is constantly flashing, no pattern no break it just flashes.  When you first start it thr indicator is not on, it starts flashing after 5min or so.  I replaced the spark plug, O2 sensor, Temperature pressure sensor and the injector (it was leaking).  Like I said it runs great just that stupid light.  Might just put tape over it and call it good

Title: Re: 2013 Cforce 500 Indicator light constant flash
Post by: murdo on March 04, 2024, 11:18:18 PM

Or remove the bulb.

Title: Re: 2013 Cforce 500 Indicator light constant flash
Post by: NMKawierider on March 05, 2024, 09:16:21 AM

It's trying to tell you there is an error somewhere. You apparently will need a code reader to find it. Might be worth a trip to the dealership.