32 inch M1 Evils.

[9-14]

hello,

im new to the utv all arround information. im trying to find some 32'' but i can't match what the size come from manufactory. exemple

front wheels : AT 27 x 9-14 (STAG)
rear wheels: AT 27 x 11-14 (STAG

i just can't find any 32 X 9-14?
Can i install some 32 X 10-14 or 32 X 11-14 on front and back?

thank you very much
SR

[2015 Z Force 800 53/Trail EPS]

Go with the 10s and 11s. Know the 32s will be much heavier and may be a problem with clearance so check first and understand what that extra weight will do to clutching.

Giant tires like that will be costly in reduced performance and reduced braking effectiveness.

Mine are 32x10x14 all the way around and no fitment issues. Good thing about same size can rotate them like a car and one spare can be used on any corner.

32 inch Terra masters.  It still feels pretty good.  I hade to cut and re weld the aluminum skid from iron Baltic to make room.  Also added a clutch kit.  I think there are some videos on YouTube from real talk powersports with 32inch carnivores.

of topic. how is the skid?

thank you, your tires looks great btw

It works pretty good.  I  had a couple small issues with the a arm guards.  The fronts at full lock rubbed the caliper so I shaved them down.  The rear were held on with two clamps that went under the knuckle (or whatever you want to call it).  It kept sliding off.  I ended up welding tabs on to bolt it to.  Over all the middle section seems pretty stout.  It's took Some hard belly hits on rocks. The sides will dent but that's what aluminum does.  Maybe after I mess those up I'll build some sliders.  I would buy them again.  I know they are expensive but I'm pretty hard on it so it's worth it for the protection.

Oh an the front can be made to work with cf motos bumper with a little trimming.

I really like the looks of that combination. I'm curious, did you need to put the wheel spacers in because of wheel offset or the larger tire, or did you add them for stability?

New to the Forum. I have  2021 zforce 950 sport , I'm wanting to put on 32x10x14 tires but I like and want to keep my original rims. has anyone done this given that the rims are different widths.

[2015 Z Force 800 53/Trail EPS]

Can't maintain the same diameter with same width tires on different width rims. On hard pack or pavement in 4wd it's a diff-breaker. Also having the front and back turning at different speeds ends the ability to engage 4wd on the fly. Just don't do it. Get a nice set of 7" wheels with the offset you need. Remember too that yours has 12mm studs so make sure the wheels are drilled for them..and are lug-centric as well.

thank you for the info I appreciate it.

Mine are 32x10x14 all the way around and no fitment issues. Good thing about same size can rotate them like a car and one spare can be used on any corner.

Did you have to do any modifications to your machine. Such as clutch, lift etc.....

Hey fellas!
We'll be releasing some 1.5" forward offset A-arms for the 950 here in about a month.  You'll get more ground clearance and the forward offset allows for bigger tires.  Not sure what the max tire size is going to be rated for yet, but it'll definitely be a good upgrade. 

I'll try to report back to this thread when they are ready.  Showing late November right now.  Probably right before Thanksgiving/Black Friday sales!   

That's great news.  I would love to space mine out from this skid.  How much will they be? And will they be square or tube.  Thanks!

That's great news.  I would love to space mine out from this skid.  How much will they be? And will they be square or tube.  Thanks!

Not sure on pricing yet.  Probably comparable to all the others we make.  They'll be the tubed arms.