hi dear all ,,,,

MIL flashing after engine started and it will keep flashing all the time how can identify the fault code unfortunately i could not understand how to count flashing to get out the fault code   

Count the number of blinks in between pauses

10 will be the most blinks between pauses.

Post the counts here.

If you can't do this, then take it in and have the dealer use a code reader.

thanks dear for your response

i tried to count put i could not make it i attached  vedio if you please watch and help me to count

[2015 Z Force 800 53/Trail EPS]

You will need a reader or follow the service manual's instructions on how to make it flash the code.

noted any idea where i can buy the redder ?

[2015 Z Force 800 53/Trail EPS]

noted any idea where i can buy the redder ?

Nope, sorry. Dealer maybe.

any vedio  or any picture of reader device so can check because no dealer in my century   unfortunately

[2015 Z Force 800 53/Trail EPS]

Looks like you will be taking it to a dealer as they can't sell these any more.

https://cfmotousaparts.com/product/cfmoto-oem-dforce-pda-diagnostic-scan-tool-kit-10523/

https://cfmotousaparts.com/product/cfmoto-oem-pda-diagnostic-scan-tool-kit-10520/

Maybe through these guys. Different number though so be careful:

http://online.mortch.com/601402-00724-CFMoto-PDA-Diagnostic-Scan-Tool-Kit

I recall a post where someone outlined a procedure to triggering the codes through the MIL lamp.

something like turning the  ignition on and off, or kill switch or something.  I've searched but can't find it here (might have been on facebook).

Perhaps someone else remembers ....

What year/model is the machine?

[2015 Z Force 800 53/Trail EPS]

I recall a post where someone outlined a procedure to triggering the codes through the MIL lamp.

something like turning the  ignition on and off, or kill switch or something.  I've searched but can't find it here (might have been on facebook).

Perhaps someone else remembers ....

What year/model is the machine?

Yeah..something like a pin grounding procedure. I might have cut it from the manual...I'll check...Yeah I think this is it:

[2015 Z Force 800 53/Trail EPS]

And this has something to do with it but not sure what. I didn't document it when I did it:

my bike model is 2017 , 550 z force ex

When you figure this out let me know . Mine has been doing the same thing for almost a year . Will go out once in a while then comes back on . Bike works fine . Hate to take it to dealer because I haven't had much luck with them in past.