[regata]

help cforce 600

I need help with my cforce 600.

I send you a video so you can see my problem.

The starter relay works fine, I changed it for a new one and it is still the same.
I have tested the starter motor outside the quad and it also works well.

I have no idea what the problem is?

The starter relay seems to be turning on and off all the time.

Thank you very much for your attention and help.

[regata]

It's not a battery problem. I have tried another battery and the same thing happens.

The starter relay instead of making a single "click" makes a constant "click, click, click".

Every 20 or 30 attempts to boot, I manage to boot it.

[NMKawierider]

The starter solenoid coil isn't getting a full 12 volts or it's ground is faulty..or the load exceeds the contactor's design specs. Why... is what you need to find out. The button triggers a relay which sends power to that solenoid and then to ground. Check that circuit and the starter motor...and that the engine does rotate as it should...ie not seizing.

[rustneversleeps]

Id say you might have some moisture in the wires making it click all the time...

[sestevao]

Hi, did you manage to sort it out? I have the same problem with mine