help cforce 600

I need help with my cforce 600.

I send you a video so you can see my problem.

The starter relay works fine, I changed it for a new one and it is still the same.
I have tested the starter motor outside the quad and it also works well.

I have no idea what the problem is?

The starter relay seems to be turning on and off all the time.

Thank you very much for your attention and help.

It's not a battery problem. I have tried another battery and the same thing happens.

The starter relay instead of making a single "click" makes a constant "click, click, click".

Every 20 or 30 attempts to boot, I manage to boot it.

[2015 Z Force 800 53/Trail EPS]

The starter solenoid coil isn't getting a full 12 volts or it's ground is faulty..or the load exceeds the contactor's design specs. Why... is what you need to find out. The button triggers a relay which sends power to that solenoid and then to ground. Check that circuit and the starter motor...and that the engine does rotate as it should...ie not seizing.

Id say you might have some moisture in the wires making it click all the time...

Hi, did you manage to sort it out? I have the same problem with mine