I have a 2017 Uforce 800
over this last week I took my uforce for a quick spin around the neighborhood. after about 2 min it just died... like it was no longer getting gas, I was at about 40 mph when it cut out and as soon as it ws stopped, it died. after about 1 min and turning the ignition off and on, it started up again and I was able to limp home (about 1/10 mi) with it dyeing another 3 times.
yesterday I needed to use the winch in the back yard and it took me 10 min to get it to drive 150 ft to the back yard and back aging to the garage. It will start on most attempts but after giving it gas it will run fine - stall (while giving gas) - then (seems like) the fuel will run fine for 2 seconds - then die, and I start the whole process over again.
To me it seems like the fuel system is not working, but this happened out of know where.
Any suggestions?

[2015 Z Force 800 53/Trail EPS]

Well..run some tests. Test fuel pressure and volume. Check the tank vent check valve and the fuel filter..it may be full of water. Then check the system voltage levels. There are some trouble-shooters in the service manuals that may also help...if you don't have a service manual...get one, everyone should have one for their machine. IMO all should come with one standard.