[BillandMary]

Hello all,
I have a 2021 Uforce 600 with 152 miles that the speedometer and odometer just stopped working yesterday. It appears that when this happened, I cannot get over 10 mph like the governor kicks in and it will bog if I try to step on the throttle over halfway. I have not seen any codes and there are none popping up when I connect my code reader. I am thinking it may be a speed sensor. I have tested it per my maintenance manual I bought, and it appears to be bad but I'm not 100% sure. Anybody have any experience like this or have any ideas? Local dealer cannot get me in until mid-April so I'm trying to fix it myself as I use my machine a lot for ice fishing. Thank you, Bill         

[NMKawierider]

If the vehicle speed sensor failed the test...why not replace it?

[BillandMary]

Well, I'm not 100% sure and their not overly expensive but it's still $125.00. It's not an easy task to try and shoot those 3 very small pins in the harness so that's why I said I'm pretty sure. I guess I was really hoping someone has run across this problem as I don't believe I'm the only one in the Uforce world to experience this issue.         

[Triton]

You said it goes to 10 mph and then bogs down.  Possibly the reverse speed limiter is kicking in although I am not sure why or how.

[Triton]

The owners manual says speed is also limited in 4-wheel lock and there is an over-ride switch for that.

[BillandMary]

I'm guessing I was doing 10 mph, don't know for sure since speedo isn't working. I'm not sure the reverse speed limiter would affect the speedo working or not.   

[btorsoer]

Hi

I am experiencing same problem - odometer and speedomenter quit working. Tried to change speed-sensor but it did not help.  Any tips?