Hello all,
I have a 2021 Uforce 600 with 152 miles that the speedometer and odometer just stopped working yesterday. It appears that when this happened, I cannot get over 10 mph like the governor kicks in and it will bog if I try to step on the throttle over halfway. I have not seen any codes and there are none popping up when I connect my code reader. I am thinking it may be a speed sensor. I have tested it per my maintenance manual I bought, and it appears to be bad but I'm not 100% sure. Anybody have any experience like this or have any ideas? Local dealer cannot get me in until mid-April so I'm trying to fix it myself as I use my machine a lot for ice fishing. Thank you, Bill         

[2015 Z Force 800 53/Trail EPS]

If the vehicle speed sensor failed the test...why not replace it?

Well, I'm not 100% sure and their not overly expensive but it's still $125.00. It's not an easy task to try and shoot those 3 very small pins in the harness so that's why I said I'm pretty sure. I guess I was really hoping someone has run across this problem as I don't believe I'm the only one in the Uforce world to experience this issue.         

You said it goes to 10 mph and then bogs down.  Possibly the reverse speed limiter is kicking in although I am not sure why or how.

The owners manual says speed is also limited in 4-wheel lock and there is an over-ride switch for that.

I'm guessing I was doing 10 mph, don't know for sure since speedo isn't working. I'm not sure the reverse speed limiter would affect the speedo working or not.   

Hi

I am experiencing same problem - odometer and speedomenter quit working. Tried to change speed-sensor but it did not help.  Any tips?