[Lazydayz]

Ok guys I went out last night an my Moto was hard to start
Would fire up run 10 sec an die the  3rd time it ran fine
Tonight I went to start it an it did the same but now idles at 2600 an the cel light is solid an the override throttle light is solid too

Neither of the lights flash

It sits in a warm shop
Haven’t done anything to it lately
Had a good right a week or so ago

[NMKawierider]

I'd say take it in. Too many things going on.

[Lazydayz]

Ya talked to the tech at my dealer this morning an went through a few things over the phone
On my way to work could be a simple thing he said could be a shit storm so came home an ran the codes cause reader was at work an shit storm lol 1200 kms in an well shit happens

[doug80638]

Low voltage!

Check the battery, voltage while running, and any loose connectors around the regulator or battery.

[NMKawierider]

Low voltage!

Check the battery, voltage while running, and any loose connectors around the regulator or battery.

X2...and any system feed like.. the main fuse holder(not fuse) for high resistance. There have been many.

[Lazydayz]

14.45 while running
Main fuse holder 12.75
Doesn’t seem to be resistance reading

It’s going in as soon as I can figure out how to get it out of the shop an on the trailer lol

[Lazydayz]

All the codes do appear to be voltage related in one way or another but the charging system an everything tests fine so I’ll unhook power tonight an trickle the battery an see tomorrow

[Lazydayz]

I thought I posted already
But any way
It was relay fuse 10a
Was broke on the side not where you’d usually see it but on the side
So I guess it was touching an not touching 
Sure makes you miss a carb an pull cord sometimes with all the electrical components now a days lol