0 Members and 1 Guest are viewing this topic.

*

Offline Wvhunter

800 pre filter
« on: March 27, 2019, 11:41:01 PM »
 Until I can make my snorkel would anybody recommend replacing the little mesh pre-filter with an oiled foam sock? Pros and cons. Thanks.

*

Offline NMKawierider

Re: 800 pre filter
« Reply #1 on: March 28, 2019, 08:49:05 AM »
Until I can make my snorkel would anybody recommend replacing the little mesh pre-filter with an oiled foam sock? Pros and cons. Thanks.
Where it is it will get clogged far too quickly and restrict flow. It would be better not to. Best to get that Uni in the box for now and check it often.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Wvhunter

Re: 800 pre filter
« Reply #2 on: March 29, 2019, 12:24:40 AM »
Thanks, uni and rim grease on it.

*

Offline NMKawierider

Re: 800 pre filter
« Reply #3 on: March 29, 2019, 10:00:23 AM »
Thanks, uni and rim grease on it.
Only need rim grease on the cover seal. The clamp and flange work better without any grease on it. And remember this lip has to go.

2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube