More pics

I finished the adaption of putting in a S&B seperator on my 800. I want to thank NMK for his help and advice. I used the silicone and pipe that he recommended. I went with the Particle Separator for 2024-2025 Polaris RZR XP 1000 because it had the whisper quiet fan. I had to put the seperator just above the back of the roof as I needed the space above to get the rig into my toy hauler. It was a chore adapting the angle but is secure and working well. Still have to hook up the CTV. I am looking forward to getting it out into some good dust and see how it works. Thanks again for the help.

Thanks, when get finished will show pics. Really appreciate it!

Where did you get the Aluminum turbo and intercooler pipe with silicone 90s and 45s? Did they come in a package together? Did you get them from S&B?
I am using 2 in PVC to the wall as you can see for the air intake and then will go to a 2 to 3 inch piece and into a 3 inch tee. I hope to come off the CTV with a 3 inch and go through the wall and then to the tee and then use the three inch that comes with the S&B to the top.
Is going from 2 inch to 3 inch off the air intake going to be a problem?

I am in the process of installing a S&B particle seperator on my 2021 Zforce 800 EX and need some info and help. I am going through the wall with pvc pipe and hoping to use a 3 inch or two inch pvc or rubber to connect to the CTV intake. But it will need to be trimmed and not sure if it will connect to one of these? Not much room either. 
Also need to wire it and was wondering what to connect to since it is not made for the Zforce. Hot wire, ground, and switch. I know I will have to install a switch.
I am planning on installing it at the back of the roof as I have seen a pic of what NMK looks to do with his. But I am not using stacks.
Have wrapped the exhaust pipe with pipe heat shield and put some heat shield behind the walls to keep it cooler during the summer.
Thanks for any help!

I am looking at adding a particle separator and was hoping some of you have added one and which one you added to your utv? I have a 2021 ZForce 800 EX and cannot find one from either S&B or KWT that fits this particular year of model. Also which one would you recommend? The KWT looks larger and takes more space than the S&B.  Are there any videos or has anyone posted on how to install one and the alterations one would need to make. I have used the cardboard method to enclose the intake inside the cab, but want to do something better and these seem to work from all the videos I have watched. Also can you attach the ctv hose to the separator.