Hey guys,
Looking for some help with my 2022 CFMOTO CForce 625 Touring. I was out riding the other day, cruising at about 95 km/h, when suddenly the engine lost power. I coasted to a stop, and when I tried to take off again, the machine would barely move—top speed is now around 8 km/h and the RPM won't go past 5,000.
What I've checked so far:
Belt: Thought it was the CVT belt at first. The old one looked glazed, so I swapped it out for a brand new one. No change at all.
Primary & Secondary Clutches: Pulled them both off and inspected them thoroughly. Weights, rollers, springs, and ramps all look good—nothing sticking, worn, or broken. They seem to be working fine.
Error Codes: No warning lights on the dash—the only light that comes on is the low fuel warning.
Hard Reset: Disconnected the battery for a full hour to reset the ECU. Still the same issue.
Symptoms:
Sudden loss of power at high speed
Won't exceed ~8 km/h
RPM hits a hard wall at 5,000
No engine light, no flashing codes
What I'm thinking:
Could it be a faulty reverse/4WD switch triggering a speed limiter?
Maybe a bad TPS (throttle position sensor) not throwing a code?
Fuel pump or filter issue?
Something else I'm missing?
The CVT system seems completely fine mechanically, so I'm leaning toward an electrical or sensor issue at this point.
Has anyone else experienced this on a 625 or similar CFMOTO model? Any ideas on what to check next? I'm open to testing sensors or anything else—just need a direction to go in.
Thanks in advance!
Looking for some help with my 2022 CFMOTO CForce 625 Touring. I was out riding the other day, cruising at about 95 km/h, when suddenly the engine lost power. I coasted to a stop, and when I tried to take off again, the machine would barely move—top speed is now around 8 km/h and the RPM won't go past 5,000.
What I've checked so far:
Belt: Thought it was the CVT belt at first. The old one looked glazed, so I swapped it out for a brand new one. No change at all.
Primary & Secondary Clutches: Pulled them both off and inspected them thoroughly. Weights, rollers, springs, and ramps all look good—nothing sticking, worn, or broken. They seem to be working fine.
Error Codes: No warning lights on the dash—the only light that comes on is the low fuel warning.
Hard Reset: Disconnected the battery for a full hour to reset the ECU. Still the same issue.
Symptoms:
Sudden loss of power at high speed
Won't exceed ~8 km/h
RPM hits a hard wall at 5,000
No engine light, no flashing codes
What I'm thinking:
Could it be a faulty reverse/4WD switch triggering a speed limiter?
Maybe a bad TPS (throttle position sensor) not throwing a code?
Fuel pump or filter issue?
Something else I'm missing?
The CVT system seems completely fine mechanically, so I'm leaning toward an electrical or sensor issue at this point.
Has anyone else experienced this on a 625 or similar CFMOTO model? Any ideas on what to check next? I'm open to testing sensors or anything else—just need a direction to go in.
Thanks in advance!