Thank you for replying.
I think also that baring make noise. Didn't use original baring, found another same dimension and i found little grease. Maybe it's making that noise because is new. I wonted just to check if is it safe to ride.

Hi.
I change belt and bearing and now clutch make this sound.
I don't know if this is normal.

I think I resolved problem. I forgot that there is another canister under the seat.

Hi. Thanks for reply. Level is good and I didn't touched cabal from oil canister where is level sensor.

Hi everyone,

I have cf850xc 2019 and my break lights didn't work. Today I changed hydraulic switch and lights working but now warning light came on. What can be a problem ? I bleed out system. I already do the same thing on cf450 and i didn't have any problem.

Check the belt's idler bearing for seizing and the shifter detent/gate alignment.

Can you be little more specific. It happens only when i put in H everything else is ok.

Not sure I can. I asked you to check two specific items based on provided info. If there is more, such as location is not from the transmission or CVT area, please explain and/or if it happens after in "H" not while shifting into "H", please let us know.

I didn't understand what did you mean by belt's idler bearing for seizing and the shifter detent/gate alignment.
It happening when i put in H and it's looks like he didn't get into gear, after that grinding start,i hit a break to stop grinding after that it goes into gear and everything is normal.

Then check the shifter alignment. The gate...that's the positions on the shifter...and the detents...that the stop points on the transmission shift shaft..have to be lined up. The rod or cable between is adjustable. Get a service manual. It will help you understand...it's a good read. If it is in alignment, then there may well be some damage in the transmission like a bent shifter fork.

I will. Thank you!

Check the belt's idler bearing for seizing and the shifter detent/gate alignment.

Can you be little more specific. It happens only when i put in H everything else is ok.

Not sure I can. I asked you to check two specific items based on provided info. If there is more, such as location is not from the transmission or CVT area, please explain and/or if it happens after in "H" not while shifting into "H", please let us know.

I didn't understand what did you mean by belt's idler bearing for seizing and the shifter detent/gate alignment.
It happening when i put in H and it's looks like he didn't get into gear, after that grinding start,i hit a break to stop grinding after that it goes into gear and everything is normal.

Check the belt's idler bearing for seizing and the shifter detent/gate alignment.

Can you be little more specific. It happens only when i put in H everything else is ok.

Hi everyone,

I have problem with cf850 xc 2019.
Sometimes when i put in H it starts grinding and i must hit a break, grinding stops and it goes in gear. Sometimes it happens sometimes it's ok. Does anyone else have similar issues and what can I do?
I change oil and belt locks ok.

It is on end of engine where axle is coming out.