[Lonnie Wrights]

Hi, my name is Lonnie Wrights and I live in Clemmons NC, I've been riding for about 16 years and have had all kinds of machines, my current ride is a 2014 Polaris Ace but I'm looking into something new. I've been doing a lot of research on the CF Moto line and info can be hard to come by. There is a place 10 minutes from my house that carries the CF Moto line called The Big Toy Super Store so I've been able to get a good look at the machines and they seem to be well built and most all the feed back I have come across has been positive. My biggest concern is how they hold up over the long haul, you know bearings, bushings, belts and so forth. I'm looking at the Z-800 with EPS so any feed back you can give me is greatly appreciated. Thanks for letting me in to chat and get some information.

[Cosmosdan]

Welcome. I would read through the forum and see the issues we have had so far. If they seem workable to you than the machine is a good deal. If you just don't want to deal with some of the issues they have than you may be better off with another ride.

[Lonnie Wrights]

All machines have their issues but with not much information out there I'm just see what to look for with the Z-800. I've had 3 Can Am's atv's and never replaced a bearing or bushing but have had lots of electrical issues, power steering issues, fuel pump failure and ECU problems, my Polaris has had bearing and bushing replacements at 1000 miles and now at 2500 the U-joints and slip yoke are gone. I like the looks and factory options the CF Moto's come with, the only thing I can see that I would have to fix right off would be the air box deal, WV can be very dusty in the summer and sometimes even in winter. Thanks for your input and I'll keep on reading cause it take a while before I can buy anything. Gotta save some cash up first.

[NMKawierider]

Welcome. Yeah that have some issues but most are easy enough to deal with. Best thing to so is go through the posts on this forum. This is your best source for into.