« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline Joe.wetherbee@aol.com

New member.
« on: February 18, 2020, 08:23:06 AM »
 Thanks for the add I have a 2018 cforce 500 ho  and. Have a lift in it 1.5 .. and was wondering if anyone else has it and. Has trouble with breaking axles
Logged
*

Offline NMKawierider

Re: New member.
« Reply #1 on: February 18, 2020, 08:45:37 AM »
Welcome. Any lift...especially on the shorter a arm models like the 500s and trails is tough on the CV joints and axles. Oddly though some don't have too many issues even with 2" lifts.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Joe.wetherbee@aol.com

Re: New member.
« Reply #2 on: February 18, 2020, 09:21:20 AM »
  So when I replaced the axle it has to be the long wheel base  one.. I'm just debating on taking the lift out. .. I'm going to a mud event for four days. And dont want to be  throwing axles lol
Logged
*

Offline NMKawierider

Re: New member.
« Reply #3 on: February 18, 2020, 10:21:18 AM »
Maybe just back off the preload so it will come down a bit.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
Pages: [1]   Go Up
« previous next »