Hi all from Australia.
I am a retired farmer from northern NSW on the east side of Aus. I have a 2013 CF 500 classic, 2014 V5 250 and 2014 (bought 2015) CF 150 Leader for a 'run around' bike.
The 500 had been set up for hunting (but I also use it for weed spraying with a modified set up from a tractor) with a 1/2" thick plastic protector covering the underneath and footplate areas. The front 'A' arms have a 3/8" thick piece of lexan covering the driveshafts and boots and similar on the rear arms. I have a 1/4" shaped steel plate at the front and a mesh screen covering the grill and lights. So far all the protective bits have taken a bashing with no damage to the bike. Only trouble I have had has been the fuel vacuum tap not shutting off which resulted in the airbox and engine full of fuel. A manual tap fitted in the line fixed that. So far so good. Am happy with the quality of CFMoto stuff for the price I paid. I look at it as 7/8 of Honda quality for 1/2 Honda price. I hope the new forum goes well.

Greetings from the other side of the world.  Thanks for posting and we look forward to future posts!