« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Buzzard

Wheel Spacers
« on: June 07, 2019, 07:08:08 AM »
 Has anyone installed any wheel spacers ? looking to get a little wider stance on my Z force 1000, pros cons ?
Logged
*

Offline NMKawierider

Re: Wheel Spacers
« Reply #1 on: June 07, 2019, 07:45:28 AM »
I have on my Trail...1.5" as they put the least...or close to the least amount of cantilever forces on the bearings, knuckles and a-arm bushings. So far so good. People do use 2" but expect noticeably shorter life out of some parts.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Buzzard

Re: Wheel Spacers
« Reply #2 on: June 07, 2019, 08:30:40 AM »
Thanks NM, was looking at the 2" but you are right on, less wear and tear is right up my alley. Looking like the 1 1/2" is the ticket !
Safe Travels
Logged
*

Buzzard

Re: Wheel Spacers
« Reply #3 on: June 07, 2019, 08:42:38 AM »
Im looking at the Slasher Billet 1 1/2" spacers from Side by Side Stuff, any opinions ?
Logged
*

Offline NMKawierider

Re: Wheel Spacers
« Reply #4 on: June 07, 2019, 10:17:34 AM »
« Last Edit: June 07, 2019, 10:21:10 AM by NMKawierider »
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Buzzard

Re: Wheel Spacers
« Reply #5 on: June 07, 2019, 12:22:59 PM »
Right on NM !
Logged
*

Offline NMKawierider

Re: Wheel Spacers
« Reply #6 on: June 07, 2019, 12:31:21 PM »
Remember to re-torque them after your first ride. Aluminum tends to cold-flow and needs at least one re-torquing. About 58-60ftlbs
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Buzzard

Re: Wheel Spacers
« Reply #7 on: June 07, 2019, 01:38:09 PM »
Thanx brother !
Logged
Pages: [1]   Go Up
« previous next »