Has anyone installed any wheel spacers ? looking to get a little wider stance on my Z force 1000, pros cons ?

[2015 Z Force 800 53/Trail EPS]

I have on my Trail...1.5" as they put the least...or close to the least amount of cantilever forces on the bearings, knuckles and a-arm bushings. So far so good. People do use 2" but expect noticeably shorter life out of some parts.

Thanks NM, was looking at the 2" but you are right on, less wear and tear is right up my alley. Looking like the 1 1/2" is the ticket !
Safe Travels

Im looking at the Slasher Billet 1 1/2" spacers from Side by Side Stuff, any opinions ?

[2015 Z Force 800 53/Trail EPS]

A bit expensive. These will fit and is what I bought for mine. 

https://www.ebay.com/itm/4-1-5-4x110-Wheel-Spacers-for-Yamaha-YFM-450-600-660-700-Rhino-Grizzly-ATV/151940578979?hash=item23605d3ea3%3Ag%3AeaAAAOSwFnxaXq64%3Ark%3A31%3Apf%3A0&fbclid=IwAR37p3OZ5OTd5JapHCpZneSM_w0De88gLgrQZ6yzMXo3yhsdcP3gS82nGuo

Right on NM !

[2015 Z Force 800 53/Trail EPS]

Remember to re-torque them after your first ride. Aluminum tends to cold-flow and needs at least one re-torquing. About 58-60ftlbs

Thanx brother !