Hello,
My neighbors 600 EFI Snypers fuel pump will not energize in start. The motor will not spin. I have bench tested the motor itself and it will work from a 12V battery.
Fuse is good. How do I find out which of the relays it is.
I see 3 metal relays and 5 plastic relay boxes. Which one is the fuel relay?
Or is there another common issue?
I am new to working on a cfmoto and finding a diagram online seems near impossible.
Any help appreciated.
Thanks

[2015 Z Force 800 53/Trail EPS]

If you have the wiring diagram just ID the power wire's color(s) and trace it back to the relay. But...do check the kill switch on the dash. They are not water proof and do fail often. They control the fuel pump circuit along with the starter and ignition circuits.

Thanks NMK,
But herein lies the problem I do not own a service manual. Tracing the wires would be something quite difficult as I would have to basically tear the thing apart.
I will check the kill switch.... I am not at the bike right now but I did not notice one. Where in the heck is that located?

[2015 Z Force 800 53/Trail EPS]

Thanks NMK,
But herein lies the problem I do not own a service manual. Tracing the wires would be something quite difficult as I would have to basically tear the thing apart.
I will check the kill switch.... I am not at the bike right now but I did not notice one. Where in the heck is that located?

It's on the dash. I'll post a pic. Here is the manual. Per the wiring diagram its a O/B ( I believe) making it an Orange/Black wire. Find it on the pump to confirm, then go to the relays and find it there. Here's that manual:

https://documentcloud.adobe.com/link/track?uri=urn%3Aaaid%3Ascds%3AUS%3Aeb3ad52b-769c-4d7b-8dc1-95f967d71fad


Here's the pic of the kill switch:

Good morning NMK,
Unfortunately the manuals color coding for the relays do not sync with anything remotely close to the actual relays wiring. At a total loss.