[Coloradocrawler]

Would someone please post up measurements with pics of the door bags. (Russian bags).

I have some scap doors and would like to know if I could make them fit without to much work.

Thanks in advance.

[Diver]

If your a looking for liners I just bought doors and liners from roden .  I do not have the measurements but i can tell ya the quality of the liners is 100% for the money. Each one has two pockets and the smaller pocket holds my rugerLC9s perfectly for out of the weather storage while riding..  Mine is a 2017 and im not sure what fits what in other years

[Coloradocrawler]

I am looking at the liners (door bags). However I have another brand of doors. I am looking for measurements to see if they would fit my doors.

[Diver]

Ok when the weather breaks i will measure mine up for ya if that will help

[Coloradocrawler]

Thanks

[vman]

I was off of the forum for a few days and just saw your post, the bag stops 4.5" short of the corner of the door where the door latch is mounted, let me know if you need any other dimensions.

[Coloradocrawler]

VMAN,

Thanks I will take some measurements on my doors tommorow.

[vman]

Con mucho gusto. Looking at your doors in the picture you posted yesterday it looks like you would need to cut his panel down quite a bit at the rear edge if nothing else, his doos are a lot longer, I think the pockets stop far enough forward that you wouldn't be cutting into them if you shortened the panel to fit your doors, I can get you the dimensions and location of the pockets if you need, Rodin is super easy to work with and would probably make you a custom set. If you do order a set you might find someone on the forum ordering doors that would that would be willing to forward the panels to you to which would cut your shipping costs, just make sure that Rodin is sending them their own door panels as well .... or as a last resort order a new set of doors

[Coloradocrawler]

VMAN,

Thanks again... I am doing a little more research on door bag options. Rodin's stuff is awesome but I don't want to spend that kind of money to cut them up. I am thinking of making my own canvas panels for my doors and attach some universal bags to them.

Not sure......However that is at least two projects down the road. Shocks (check)....  Exhaust...in the works.  Fender flares ( an absolute must )  Then door bags........LOL

[kayak-cowboy]

Just a thought. In my area we have an Amish leather shop. They can make just about anything, usually cheaper than you can buy retail. (They work with leather and other materials.) If you have an Amish community in your area, it might be an option. If doors are removable take them to the shop for measurements, if not removable take the whole machine. Also take a photo of the door bags, so they have an idea of what you want.

[vman]

If you want to go quick and easy use 1/8" ABS and screw these on, $32.95 ebay.com/bhp/rzr-bag

[Coloradocrawler]

I was looking at that exact bag....lol

Not sure what direction I am going with yet.

Thanks