0 Members and 1 Guest are viewing this topic.

*

Offline Dave K

Just a silly question
« on: March 20, 2020, 06:10:23 AM »
  Has Any one used an offset key on the flywheel to advance the timing ?
There doing this on Polaris , Skidoo & artic cats To gain more low end & Acceleration. Im  only talking max of  2 deg which = 1 to 2 hp per each deg.  The only thing you have to run premium
fuel & A Fuel  Tuner Which is what i run any way.  Every thing i read on these engines say they benefit from up to 2 deg.s & no more. Any more will burn down the piston.
Dave K.

*

Offline NMKawierider

Re: Just a silly question
« Reply #1 on: March 20, 2020, 09:58:46 AM »
  Has Any one used an offset key on the flywheel to advance the timing ?
There doing this on Polaris , Skidoo & artic cats To gain more low end & Acceleration. Im  only talking max of  2 deg which = 1 to 2 hp per each deg.  The only thing you have to run premium
fuel & A Fuel  Tuner Which is what i run any way.  Every thing i read on these engines say they benefit from up to 2 deg.s & no more. Any more will burn down the piston.
I think I read on one of the FB pages of some doing that...so yes. Not me though.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube