So I just Bought a 2016 Zforce 800 EX this weekend. I'll post a picture and introduction a little later. I am was reading the owners manual. It says there is a winch remove control and a winch control cable for when the remote does not work. I may be confused but this sounds like I should have the winch wired controller (which I do) that plugs into the dash on the passenger side with the wired remote. It sounds like there is also supposed to be a wireless remote control as well?  If I am wrong let me know, it's quite possible I'm reading this wrong but I did not get a wireless winch remote control.  I just wanted to know what others got before I contact the dealer and let them lie to me. As a side note I am in the US, seems we get the less expensive versions of these with less warranty than everyone else.

[2015 Z Force 800 53/Trail EPS]

None I know of prior to 2016 came with wireless remotes. Some of us have installed them though on our own.

Mine did NOT come with one. 2015 Zforce 800EX
Was thinking of installing the harbor freight one though.

I got a wireless remote with my 2016 Uforce 500.

I also have both the wired and wireless in the glove box of my Uforce 500. I did find it strange that the winch is not on a relay tied to the ignition switch circuit. It is live off the battery. I guess that is why they are locked up in the glove box.

my 15 Uforce800 came with both

From the posts I see here it appears that answer varies according to the CFM model. My '16 Zforce 800 EX did not come with a wireless remote. I haven't read anything indicating it should. Someone has posted the wiring diagram to use the HF one though.

yea it seems maybe the u-force does but the zforce doesn't. I read the manual and it appeared to indicate it would have one but they are pretty generic and not very accurate with some things.

Only the Uforce Series comes with wireless from factory.
You can update
You will need.
wireless remote 7030-1507A0
Control relay solenoid  7030-150720

The remote and receiver are a mated pair
The Relay Solenoid need to be the four wire out to connect the wireless receiver, Standard is a three wire