[REDRIDER]

So I just Bought a 2016 Zforce 800 EX this weekend. I'll post a picture and introduction a little later. I am was reading the owners manual. It says there is a winch remove control and a winch control cable for when the remote does not work. I may be confused but this sounds like I should have the winch wired controller (which I do) that plugs into the dash on the passenger side with the wired remote. It sounds like there is also supposed to be a wireless remote control as well?  If I am wrong let me know, it's quite possible I'm reading this wrong but I did not get a wireless winch remote control.  I just wanted to know what others got before I contact the dealer and let them lie to me. As a side note I am in the US, seems we get the less expensive versions of these with less warranty than everyone else.

[NMKawierider]

None I know of prior to 2016 came with wireless remotes. Some of us have installed them though on our own.

[gfmoto]

Mine did NOT come with one. 2015 Zforce 800EX
Was thinking of installing the harbor freight one though.

[MichaelE]

I got a wireless remote with my 2016 Uforce 500.

[impact]

I also have both the wired and wireless in the glove box of my Uforce 500. I did find it strange that the winch is not on a relay tied to the ignition switch circuit. It is live off the battery. I guess that is why they are locked up in the glove box.

[Chrisg73]

my 15 Uforce800 came with both

[willpower719]

From the posts I see here it appears that answer varies according to the CFM model. My '16 Zforce 800 EX did not come with a wireless remote. I haven't read anything indicating it should. Someone has posted the wiring diagram to use the HF one though.

[REDRIDER]

yea it seems maybe the u-force does but the zforce doesn't. I read the manual and it appeared to indicate it would have one but they are pretty generic and not very accurate with some things.

[Wheels]

Only the Uforce Series comes with wireless from factory.
You can update
You will need.
wireless remote 7030-1507A0
Control relay solenoid  7030-150720

The remote and receiver are a mated pair
The Relay Solenoid need to be the four wire out to connect the wireless receiver, Standard is a three wire