Flag mount??

Started by JJram82, September 11, 2016, 01:24:32 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

JJram82

Guest
Logged
JJram82
Guest
So just curious when you go to a state park or something like that they required a flag where are you guys mounting them because I haven't found a flag mount on a the z 500 also can someone put a link on here too the rock sliders called rodi s ive read about on Here

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
I use a home made version of the Polaris Lock-N-Ride mount which is in the How-To section and Nicholas Rodin, the maker of the Rock Sliders, is a vender here, his contact info in in his area.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

chuddly

*****
Guru
Posts: 650
Logged
chuddly
GuruPosts: 650
I went with this Tusk mount.  It clamps right on to the front bumper and took like 5 min to install it.  I then put a male air hose fitting in it and a female on on the end of my flag.  That way when i get to where im going all i have to do is clip my flag on and im ready.  When im done its a simple unclip and toss the flag in my truck bed or in the SxS and im out of there.  Here is a link to the Tusk mount - http://www.ebay.com/itm/282113896269?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT.   Here is a picture of it on my Zforce with the air fitting.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

emersonsc

Guest
Logged
emersonsc
Guest
Not sure if your state or parks have specific rules on where it has to mount, but if they don't, look in the bed. Almost smack dab in the center of the access panel is a mount for a flag. It's where my LED whip mounts. I have to drill and tap mine because the mount I got came with standard size bold/thread.

chuddly

*****
Guru
Posts: 650
Logged
chuddly
GuruPosts: 650
Im sure you know this Emerson but to get into Silverlake, MI dunes (and from what I'm told all MI riding areas) if you ride "in it" the flag mount must be on the front.  If you ride "on it" the flag mounts must be on the back.  That makes the Zforce a front mount vehicle.  Just pointing out thats how i chose to mount my flag.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

emersonsc

Guest
Logged
emersonsc
Guest
Quote from: chuddly on September 21, 2016, 09:28:26 AM
Im sure you know this Emerson but to get into Silverlake, MI dunes (and from what I'm told all MI riding areas) if you ride "in it" the flag mount must be on the front.  If you ride "on it" the flag mounts must be on the back.  That makes the Zforce a front mount vehicle.  Just pointing out thats how i chose to mount my flag.

I didn't know this. Thank you. I myself have never been. I hear there is a height requirement too. If thats the case if so what is it?

chuddly

*****
Guru
Posts: 650
Logged
chuddly
GuruPosts: 650
The height requirement is 10 ft from the ground.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.