where  do  i buy a set of brake pads for 2021 800 xc  ?

[2015 Z Force 800 53/Trail EPS]

where  do  i buy a set of brake pads for 2021 800 xc  ?

You can check with EBC and ebay but I'll bet it's too early for any aftermarkets yet.

I have a 2020 800 zforce and there are no aftermarket brakes available for it.

i just wan't  to get a spare set just in case  prob the same as 2017 and up

I have a 2020 800 zforce and there are no aftermarket brakes available for it.

Has the Z-force changed its brake set up since 2015 or 2017?  If not, EBC makes pads for the 2017. 

LF - FA135
RF - FA165
Rears - FA651

[2015 Z Force 800 53/Trail EPS]

I have a 2020 800 zforce and there are no aftermarket brakes available for it.

Has the Z-force changed its brake set up since 2015 or 2017?  If not, EBC makes pads for the 2017. 

LF - FA135
RF - FA165
Rears - FA651

Yeah the 2018+s are different...and better.

I have a 2020 800 zforce and there are no aftermarket brakes available for it.

Has the Z-force changed its brake set up since 2015 or 2017?  If not, EBC makes pads for the 2017. 

LF - FA135
RF - FA165
Rears - FA651

Yeah the 2018+s are different...and better.

Ok, thanks.  Yeah - mine are dogshiite.  I wonder what it would take to upgrade?  The rotors and calipers?  Or are the hubs and knuckle different, too?

[2015 Z Force 800 53/Trail EPS]

I have a 2020 800 zforce and there are no aftermarket brakes available for it.

Has the Z-force changed its brake set up since 2015 or 2017?  If not, EBC makes pads for the 2017. 

LF - FA135
RF - FA165
Rears - FA651

Yeah the 2018+s are different...and better.

Ok, thanks.  Yeah - mine are dogshiite.  I wonder what it would take to upgrade?  The rotors and calipers?  Or are the hubs and knuckle different, too?

I don't know man...our luck the mounts are different so all the hubs/knuckles would have to be replaced...as well as the rotors and calipers. I got mine almost acceptable...at least "less dangerous" by ensuring all slides work, replaced all the pads with either EBCs or cheap soft ones from ebay, replaced the fluid with synthetic and cleared all the air. At least it stops with one foot now and almost slides the tires...lol

Yeah, I did most of that, short of replacing the brake fluid.  Two of the calipers were partially seized.  So got them cleaned up and working.  It's stops the machine, but they aren't great by any stretch.

[2015 Z Force 800 53/Trail EPS]

Yeah, I did most of that, short of replacing the brake fluid.  Two of the calipers were partially seized.  So got them cleaned up and working.  It's stops the machine, but they aren't great by any stretch.

The first time I jumped in my friend's RzR 800 and hit the brakes like I do mine...it slammed me into the steering wheel and about broke a rib, I knew I had a long way to still go with mine.

Had my U-force 1000 out yesterday, brakes need some improvement on this model also.