0 Members and 1 Guest are viewing this topic.

*

Offline Cosmosdan

4 Point Harness
« on: April 24, 2016, 02:36:12 AM »
I have the 4 point harness in my Z6. The factory ones are just bad and hard to adjust. I was looking at some cheaper cam type ones to put in there. Anyone tried these?  I would go get some proarmor harnesses, but I'm cheap and the wife is talking about going to the 500H.O. so I my only use them for 1-2 more seasons.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: 4 Point Harness
« Reply #1 on: April 24, 2016, 08:31:57 AM »
I have the 4 point harness in my Z6. The factory ones are just bad and hard to adjust. I was looking at some cheaper cam type ones to put in there. Anyone tried these?  I would go get some proarmor harnesses, but I'm cheap and the wife is talking about going to the 500H.O. so I my only use them for 1-2 more seasons.

I bought the cheap set from SuperATV and find they are a great harness. About a hundred buck for the set. Very happy with them.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Jason

Re: 4 Point Harness
« Reply #2 on: April 24, 2016, 09:27:16 AM »
I use the PRP 4.2SB seatbelt buckle style latch ones.  They're great and I had them in my ZForce before I sold it.  No issues after a year and a few months of total use with the latch.

I will say installing harnesses in general on the ZForce was a minor PITA.  Getting to the buckle base where you anchor the lap belt was the problem.  I had to go from underneath with a ratchet and have someone topside with a wrench to break everything loose then retighten.  It'd probably be just as easy to remove all of the center console plastic.

*

Offline chuddly

Re: 4 Point Harness
« Reply #3 on: April 25, 2016, 07:38:08 AM »
I had some cheap 4 points in my rhino and recently pulled them to go to Pro Armor 5 points.  Nothing WRONG with the cheap ones but they sure were not comfortable at all.  The Pro Armors are SOOOO much nicer its not even funny.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

*

Offline Cosmosdan

Re: 4 Point Harness
« Reply #4 on: April 26, 2016, 12:05:44 AM »
I looked for the superatv $100 set, but couldn't find them. I would like to buy the expensive ones, but I'm not sure how much longer I will keep the SXS. Most of my money is going into the house right now.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: 4 Point Harness
« Reply #5 on: April 26, 2016, 08:43:00 AM »
I looked for the superatv $100 set, but couldn't find them. I would like to buy the expensive ones, but I'm not sure how much longer I will keep the SXS. Most of my money is going into the house right now.

Went up a little- this is for the pair, pick black or red.

http://www.superatv.com/SuperATV-UTV-Latch-Seatbelts--P1017C1753.aspx
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Cosmosdan

Re: 4 Point Harness
« Reply #6 on: April 26, 2016, 04:46:51 PM »
Thanks for the link. I appreciate it.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet