2019 ZForce 1000 hard starting.

Started by stevers001, August 11, 2019, 11:32:47 AM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

stevers001

Guest
Logged
stevers001
Guest
We have had it about a month and since we got it it has been hard to start, it takes about 4 or 5 tries before it will finally go. Not sure this is normal? Thanks for any input.

glenlivet

*****
Guru
Posts: 678
2017 Z-Force 800 Trail
Logged
glenlivet
GuruPosts: 678
Not at all normal. Should go back for diagnosis sooner than later.
For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Quote from: glenlivet on August 11, 2019, 01:17:18 PM
Not at all normal. Should go back for diagnosis sooner than later.
Agreed, not normal at all. Should just touch the key and it's running like the 800s. May have a weak or bad CPS or something simple like that. Get it checked out...before you wear the starter or starter drives out prematurely.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Buzzard

Guest
Logged
Buzzard
Guest
I am having the same issue with my z 1000, takes 3 or 4 tries for it to start and stay idling. Hoping to get it in in the next few weeks.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Before you guys go too far, pull the mass air sensor/temp sensor out from on top of the intake tube and see if it is covered with oil or dirt. I know when I first went to foam filters I over oiled it and it wouth pull enough oil in that it would get covered. Then it sends a false reading to the ECU. For me it caused sometimes a stall when cold but mostly every time I put it into reverse it would die. Once I cleaned it...and you HAVE to use MASS air flow sensor cleaner...all that would stop. Sense then I use a better oil and get the excess out before installing it and all has been good. May not be your problem but certainly easy to check.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Buzzard

Guest
Logged
Buzzard
Guest
You rock NMK, gonna try that tonite.
Thnx and will let y'all know.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

Buzzard

Guest
Logged
Buzzard
Guest
Hey Steve, cleaning the mass air sensor did it for me,  starts with just a bump of the key and purrs like a kitten. You might want to start there first like NMK said.
Thnx NMK !

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Quote from: Buzzard on August 13, 2019, 06:06:52 PM
Hey Steve, cleaning the mass air sensor did it for me,  starts with just a bump of the key and purrs like a kitten. You might want to start there first like NMK said.
Thnx NMK !
Cool...glad it helped. Helped mine.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

rlc

****
Senior Member
Posts: 214
Logged
rlc
Senior MemberPosts: 214
NMK - Thanks for all of your tips and advice.  Sure is good to have people like you that we can bounce or problems off of.  People like you are truly appreciated by people like me.
2019 Z8 Trail - SuperATV Flip Windshield - UniFlow Air Filter - Rayco Door Inserts - Custom Rear Cargo Rack - Custom air intake (fuel side) -

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
Thanks. I just try and pass-on what I can.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube