2014 800 terralander, wont start unless i depress foot brake several times, have been up to 10 times or more before she will start.  i know theres a safety switch there somewhere.  anyone know if this can be bypass or an easy diy fix.   tia

[2015 Z Force 800 53/Trail EPS]

These have a simple two relay interlock system which relays are triggered by the current from a brake light or the ground for the neutral indicator provides power to the starter system. You can bypass or jumper the relays... or you can simply find and fix the problem. It may only be a bad relay or a mis-adjusted brake light switch... or a bad neutral switch. All an easy fix.

These have a simple two relay interlock system which relays are triggered by the current from a brake light or the ground for the neutral indicator provides power to the starter system. You can bypass or jumper the relays... or you can simply find and fix the problem. It may only be a bad relay or a mis-adjusted brake light switch... or a bad neutral switch. All an easy fix.

any idea where this switch is located, problem getting a bit worse and i cant see this switch anywhere,    tia

you shouldnt have this problem if the bike is in park. only time you should need to use the brake to start is if you are in H, L,  or R.

dont matter what gear its in.   what i have to do now is depress the brake , move the gear shift back and forth several times fr low to park and then she will usually start in one of the 5 positions.  might have to do this a cpl times before it starts. 

didnt realize it but you can start the bike by applying  the hand brake.   works fine a starts right up,  will not start when applying foot brake.   also no brake lights when using the foot brake.