My owners manual specifically shows me the grease points for the upper and lower pivot points of the rear and front suspensions but it does not show me where the other grease points are on the drivetrain or otherwise.

Any do it your selfers out there who can give me a count/location of the grease points besides the suspension points?

[2015 Z Force 800 53/Trail EPS]

My owners manual specifically shows me the grease points for the upper and lower pivot points of the rear and front suspensions but it does not show me where the other grease points are on the drivetrain or otherwise.

Any do it your selfers out there who can give me a count/location of the grease points besides the suspension points?

Far as I know there are no other grease points other then the a-arms and rear Knuckles.

My owners manual specifically shows me the grease points for the upper and lower pivot points of the rear and front suspensions but it does not show me where the other grease points are on the drivetrain or otherwise.

Any do it your selfers out there who can give me a count/location of the grease points besides the suspension points?

Far as I know there are no other grease points other then the a-arms and rear Knuckles.

Good to know! The manual shows in the image attached that there are drivetrain points as well. See last line in the image. It was throwing me off as I couldn't find any other pointers in the manual to do that.

[2015 Z Force 800 53/Trail EPS]

Check the front drive line's u-joints and the sway bar bushings.

Check the front drive line's u-joints and the sway bar bushings.

Will do.

I have one on my shaft yolk u-joint, cforce600 2019 model, its all painted black/or material color, and its really hard to find but its tiny and in there. 

I have one on my shaft yolk u-joint, cforce600 2019 model, its all painted black/or material color, and its really hard to find but its tiny and in there.

I greased the 800 xc today and could not find any other nipples except on the rear axle arms. Can you send a picture of the area you are describing on your 600?

I have a 2019 X8 and it's got grease nipples on the prop shaft two on the front section and one on the rear, lay under and roll the quad to ensure they spin and you will see them 👍

Hi what type of grease did you use?

I have one on my shaft yolk u-joint, cforce600 2019 model, its all painted black/or material color, and its really hard to find but its tiny and in there.

I greased the 800 xc today and could not find any other nipples except on the rear axle arms. Can you send a picture of the area you are describing on your 600?

Hi what type of grease did you use?
I would think marine grease will work..

I have one on my shaft yolk u-joint, cforce600 2019 model, its all painted black/or material color, and its really hard to find but its tiny and in there.

I greased the 800 xc today and could not find any other nipples except on the rear axle arms. Can you send a picture of the area you are describing on your 600?

ohh, Ill have to go back and revisit my bike tomorrow.

I did an oil change today and alternately raised both ends, pulled the wheels, inspected the brakes and joints, etc.
I did not find any front grease points, but found four in the rear.
The front joints appear to be sealed units without a plug for an insertion point.
(2022 8000XC)