0 Members and 1 Guest are viewing this topic.

*

Offline lambeano

Broken Front Diff Mounts
« on: January 10, 2017, 08:07:06 PM »
So today while plowing felt a horrible vibration from the front end. After inspecting found that the mounts that are welded to the frame that the front differential bolts to both are snapped off. Only have 94 miles on the machine. Just curious if anyone else has had anything like this happen. Dealer says either a whole new frame or new wheeler. Just waiting to see what CFMOTO is going to do.
« Last Edit: January 10, 2017, 08:41:43 PM by lambeano »
2016 CFORCE 500 H.O.
60" KFI plow system

*

Offline NMKawierider

Re: Broken Front Diff Mounts
« Reply #1 on: January 10, 2017, 08:12:18 PM »
Yikes...Wonder if they were loose to start with.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline Cosmosdan

Re: Broken Front Diff Mounts
« Reply #2 on: January 10, 2017, 08:20:54 PM »
I haven't seen that one yet. When you get out of warranty, I would beef up the ears on that mount. Maybe they would be willing to bring it to a fab shop and have it done now. Might be cheaper for them and you will have a stronger mount.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline lambeano

Re: Broken Front Diff Mounts
« Reply #3 on: January 10, 2017, 08:34:01 PM »
Yikes...Wonder if they were loose to start with.

Honestly I think that's what caused it being loose to begin with and rubbed until it broke
2016 CFORCE 500 H.O.
60" KFI plow system

*

Offline lambeano

Re: Broken Front Diff Mounts
« Reply #4 on: January 10, 2017, 08:35:55 PM »
I haven't seen that one yet. When you get out of warranty, I would beef up the ears on that mount. Maybe they would be willing to bring it to a fab shop and have it done now. Might be cheaper for them and you will have a stronger mount.

I was thinking the same thing definitely don't want to go through this again
2016 CFORCE 500 H.O.
60" KFI plow system