0 Members and 2 Guests are viewing this topic.

*

Offline piggpen

parts for a swat 500 cr
« on: January 08, 2021, 11:03:08 AM »
hi all im new to this forum ... i purchased a cf moto swat 500 cr (2012). i am having trouble finding parts for it . most sites that deal with cf moto dont even give me the option to choose the swat 500 cr ( only c force and u force ) would my sxs have the same parts as another sxs ? does anyone know where i could get parts for this particular unit ? thankyou in advance

*

Offline NMKawierider

Re: parts for a swat 500 cr
« Reply #1 on: January 08, 2021, 11:26:25 AM »
Welcome. As I recall, the Swat, Rancher and UForce were all the same, just had different names weather they were in the US, Canada or Europe.  Try Alpha-Sports.com or ProCorepower.com.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

*

Offline piggpen

Re: parts for a swat 500 cr
« Reply #2 on: January 08, 2021, 11:30:38 AM »
thankyou ....i thought they may have called it a rancher as well .

*

Offline doug80638

Re: parts for a swat 500 cr
« Reply #3 on: January 08, 2021, 11:47:07 AM »

Interesting the NAPA up north has a CFMoto section:


https://www.napacanada.com/en/motorcycle-atv-parts/cfmoto_atv___utility


2017 Zforce 800 - Red
SuperATV Flip windshield
Tusk soft rear window
Uni-Filter foam air filter
Bandit springs

Re: parts for a swat 500 cr
« Reply #4 on: January 08, 2021, 11:55:50 AM »
Cfmoto is popular in Canada

*

Offline piggpen

Re: parts for a swat 500 cr
« Reply #5 on: January 31, 2021, 12:00:54 PM »
i did end up going to napa . found my bearings and boots , but i have already went through the new front bearings on one side . i am assuming i am missing a washer or another part in the front end causing the bearings to prematurely wear . does anyone have a schematic of the front drive system so i can see what i am missing ? i cant seem to find any information over the internet .