S&B filters partical separator.
This is the YXZ system fitted to an 800EX

Few more pics of partical filter in general discussion

Few more pics of partical filter in general discussion

Saw the pics. That's a good looking install.

That looks great I also installed the same S&B on my 800 trail have not taken for a test run but am sure it will be 100% better then what I had.
thought I would post a picture.

Thought I would post a picture of my filter after a 100 mile ride through powder dust, dirt roads and very dusty gravel. I never expected the results to be this good.  With out a doubt the particle separator does work. 

[2015 Z Force 800 53/Trail EPS]

WOW!   F'n-A! That's great! OK...I'm sold.

Wow, that's crazy clean.

I'm very intrigued by this device. I wonder though, how to incorporate it with a rear window, needed when running with a windshield. The 'exhaust' ports on the model shown seem to need an opening between the rear roll cage bars. "Following.

[2015 Z Force 800 53/Trail EPS]

I'm very intrigued by this device. I wonder though, how to incorporate it with a rear window, needed when running with a windshield. The 'exhaust' ports on the model shown seem to need an opening between the rear roll cage bars. "Following.

As I too have a rear windshield I decided a long time ago that I was going to relocate my rear light and mount the separater in the center so it just peeks over the top of the roof line. This will allow it to be high enough to "Y" or "T" off into both of my stacks. S&B told me it was capable of providing almost twice the air needed for the 800 and the CVT so I'm plumbing it into both.

My UNI filter is the same since I fitted the partical separator 300 kms tons of dust in 30 + degrees C
NO dust at all on the filter everthing else is covered in it.
The system is amazing its a must for all UTV´s in dry conditions.