I am new to the forum so bear with me. I bought a left over 2017 cfmoto zforce 800 trail this past November. The information I'm looking for is a cheap wheel and tire assembly for a spare. The front wheel is 24x9x16. What would the get by size be to purchase?

I'm sorry incorrect size, new size 26x9x14.

[2015 Z Force 800 53/Trail EPS]

Welcome. Just as a spare you will need another 26" tire and I would stay with a 9" wide.. but there are mixed reviews on weather a 12" wheel will clear everything so I think I would stay with a 14"...and just any 6 or 7" wide wheel. The offset on aftermarket wheels will be different then what came with your machine so..the closest you will find to one of the fronts is a 4+2. But it's just a spare so don't discount a 4+3 or a 5+2. The lug pattern is 4-110 and they are Lug-centric meaning they use the lugs to center the wheel, not the hub so it will use tapered lugs into tapered holes. You can always look to ebay for one used wheel or go onto the FB group sites and see if anyone is selling their old wheels. Get a front one as you can use it on either. The back is too wide to run on the front for long.

Personally, I don't want to carry that extra weight so I went with good 8-ply radials and put together a decent plug-n-patch kit with a decent 12Volt compressor - all tucked away under the front compartment. Haven't needed it yet.

Sorry it took me so long to respond, I'm a dealer trade driver and I had go out last night and this morning. Thank you for the quick response. I thought I would be able to use the itp steel wheels size 14x7, is this a option?

[2015 Z Force 800 53/Trail EPS]

Sorry it took me so long to respond, I'm a dealer trade driver and I had go out last night and this morning. Thank you for the quick response. I thought I would be able to use the itp steel wheels size 14x7, is this a option?

Sure.

Thanks for the info...