Hey guys been following CFMoto for a while and I am just waiting to get back from my deployment to go check out the local dealer to possibly buy a Zforce 800. Quick question does anyone have young kids that ride with them? I am looking to get my wife and 3 year daughter into wheeling. I saw that some companies make bench seats and center seats for side x sides but nothing for CFMoto that I can find. What kind of setup are you all working with? And don't worry I won't be going fast at all with the kiddo, I just want to bring her along. She was so sad when I sold my Grizzly 660

I had built a seat and roll cage for my Yamaha Rhino I used to have.  The seat was out of a Jeep cj5 (rear seat) and all i did was bolt it down and build a rear roll cage to protect them.  Now the CF Moto bed is narrower so I dont think that seat would work.  But you could just get a seat like this (I know its a little $$$ but its for kiddo safety and buy a $100 harness for her and you are all set.   ( http://www.jegs.com/i/Scat/942/80-1620-62C/10002/-1?CAWELAID=230006180037541807&CAGPSPN=pla&CAAGID=44693592161&CATCI=aud-194567928791:pla-176541687431&CATARGETID=230006180039218968&cadevice=c&gclid=Cj0KEQjwxPbHBRCdxJLF3qen3dYBEiQAMRyxS3O_mEBaCnD6uW7QhE3p4VcZ9dSV6Mq6OmbtZ9DQjr8aAuGA8P8HAQ )

Does anyone make a rear roll cage for the zforce. I have no fab skills myself so I would have to buy it or have someone make it for me. Bolting a small seat in the bed should be easy

No one makes one that would go up high enough.  There is a place that makes "kicker bars" but nothing that would protect the kiddo.  Check with some local fab shops as it shouldnt be to bad to have one made.

Awhile ago I was thinking about using a rear seat for a bike and making a bracket for it between the seats. Got distracted and she got bigger on me. Would a jump seat for an rzr be made to work?

Was thinking of using something like this for my golf cart. Just need some plywood, foam, and vinyl to wrap it.
https://www.ruralking.com/towtek-rear-cargo-carrier.html?utm_source=google&utm_medium=cpc&utm_source=google&utm_medium=cpc&scid=scplp50590269&sc_intid=50590269&gclid=CPGHvqfL0dMCFQKewAodstcDPA

The only issue I see with doing a bench seat or something in the middle is the e-brake handle is right there and it would have to be moved to another location. Unfortunately until I get back to look at a zforce again I won't know how hard it would be to remove the handle and relocate so I could put a bench in there. I think that would be the best option but how to do it lol.

Well, could always go over the e brake. Just not in use when having 3 people.

Looks like some mid seats are higher up to clear the handle or have a notch in the front to make room.