Rear Axles

Started by mike17901, April 22, 2020, 08:37:09 AM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic

mike17901

Guest
Logged
mike17901
Guest
Are both rear axles the same? Looking to buy a spare and was wondering if one rear axle would be able to replace both?

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
If you looking them up and the part numbers are the same, then yes.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

mike17901

Guest
Logged
mike17901
Guest
Quote from: NMKawierider on April 22, 2020, 09:08:42 AM
If you looking them up and the part numbers are the same, then yes.


When I look them most places change like one number from left to right.

NMKawierider

Global Moderator
*****
Guru
Posts: 12,593
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,593
#3
Quote from: mike17901 on April 22, 2020, 10:21:19 AM
Quote from: NMKawierider on April 22, 2020, 09:08:42 AM
If you looking them up and the part numbers are the same, then yes.


When I look them most places change like one number from left to right.
At least with CFM, if there is no difference, the part number remains the same. Looking at the parts breakdown, although the outer CVs and half-shafts are the same, the axles and the inner CVs and half shafts are different...so, no they are different.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

mike17901

Guest
Logged
mike17901
Guest
Quote from: NMKawierider on April 22, 2020, 10:35:18 AM
Quote from: mike17901 on April 22, 2020, 10:21:19 AM
Quote from: NMKawierider on April 22, 2020, 09:08:42 AM
If you looking them up and the part numbers are the same, then yes.


When I look them most places change like one number from left to right.
At least with CFM, if there is no difference, the part number remains the same. Looking at the parts breakdown, although the outer CVs and half-shafts are the same, the axles and the inner CVs and half shafts are different...so, no they are different.




Ok thank you