Does any one know the bolt pattern and stud/nuts size? On a zforce 800  thank you.

[2015 Z Force 800 53/Trail EPS]

Does any one know the bolt pattern and stud/nuts size? On a zforce 800  thank you.

They are 4/110 and the same size as my Brute except slightly shorter. I have some spares I could measure if needed.

Just need stud size and thread?

[2015 Z Force 800 53/Trail EPS]

Just need stud size and thread?

Did you break one? I have a few new spares for the Brute. You can have one.

No my friend has some brand new 1.5inch spacer and I was going to try them on but he lives in El Paso tx so before he sends them to me I wanted to make sure the bolt pattern and stud Worked They fit 10mm x 1.25 or 10x1.25 or M10x1.25 Studs / Nuts
Bolt Pattern4x110 ?

[2015 Z Force 800 53/Trail EPS]

No my friend has some brand new 1.5inch spacer and I was going to try them on but he lives in El Paso tx so before he sends them to me I wanted to make sure the bolt pattern and stud Worked They fit 10mm x 1.25 or 10x1.25 or M10x1.25 Studs / Nuts
Bolt Pattern4x110 ?

Oh, sure, they should fit. Like I said the Kawasaki's are the same just a hair longer. I'll measure them tonight and post here.

Thank you Im a give it a try and i wanted to know the stud size and tread size just to have if I ever need to replace ? Does anyone know

[2015 Z Force 800 53/Trail EPS]

Well the stud is a 10mmx 1.25 thread and the threaded part the would stick past the hub is 25mm. The moto's are like 22-23mm but to be sure I would need to take a wheel off and measure.  I think the spacers should work.

One more question does anyone know the wheel center bore is it 74mm? Thank u