0 Members and 1 Guest are viewing this topic.

*

Offline gibbyzforce

Fuse blowing
« on: July 12, 2017, 08:05:10 PM »
Twice now when I started up the 800, With the lights on the display and the lights go out. I replace fuse and the display comes back on and the lights work. I went 300 miles (3 weeks) then it blew again last weekend.Replaced fuse everything works.  Hard to fix when it doesn't stay shorted???? Anyone have this issue?

*

Offline Cosmosdan

Re: Fuse blowing
« Reply #1 on: July 12, 2017, 09:10:00 PM »
I hate electrical problems. Look for rubbing wires or a loose connection. Sorry to say it, but the hunt is on.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline NMKawierider

Re: Fuse blowing
« Reply #2 on: July 12, 2017, 09:36:25 PM »
Yeah..although I have not had that I have found some connectors that fit loose enough to cause a poor connection...enough to make heat and if it can do that, it can blow a fuse. It also can be something pulling too many amps like a bad starter solenoid or just a bad connection on it. Like Cosmo says...the hunt is on. Fortunately you know it's on that circuit that blows that same fuse....and you know its starter activation-related so..shouldn't be too bad. Start at the solenoid and work back. 
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube