Electric

Started by davidpaul, October 05, 2017, 03:18:04 PM

0 Members and 1 Guest are viewing this topic.

Previous topic - Next topic
Go Down Pages1
User actions

davidpaul

*****
Guru
Posts: 352
Logged
davidpaul
GuruPosts: 352
October 05, 2017, 03:18:04 PM
Does anyone know if there is a wire connection which is on when the ignition switch is in the run or on position but off when in the start position
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
October 05, 2017, 04:27:51 PM
#1
Quote from: davidpaul on October 05, 2017, 03:18:04 PM
Does anyone know if there is a wire connection which is on when the ignition switch is in the run or on position but off when in the start position
Doesn't look like it per the wiring diagram.
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

bezerk1

*****
Guru
Posts: 354
Logged
bezerk1
GuruPosts: 354
October 05, 2017, 04:44:20 PM
#2
Seems like this can be accomplished with a simple relay in the normally closed position.

davidpaul

*****
Guru
Posts: 352
Logged
davidpaul
GuruPosts: 352
October 06, 2017, 03:47:27 AM Last Edit: October 06, 2017, 04:37:39 AM by davidpaul
#3
Quote from: bezerk1 on October 05, 2017, 04:44:20 PM
Seems like this can be accomplished with a simple relay in the normally closed position.

Ok, would I use one of the 5 pin relays ?
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards

NMKawierider

Global Moderator
*****
Guru
Posts: 12,594
2015 ZForce 800 53 (Trail)
Logged
NMKawierider
Global ModeratorGuruPosts: 12,594
October 06, 2017, 08:43:19 AM
#4
Yes. So..what is it that you want to have power in the run position but not while cranking?
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube

davidpaul

*****
Guru
Posts: 352
Logged
davidpaul
GuruPosts: 352
October 06, 2017, 09:55:56 AM
#5
Quote from: NMKawierider on October 06, 2017, 08:43:19 AM
Yes. So..what is it that you want to have power in the run position but not while cranking?

I have added a small battery to run two lights so I don't need to worry about draining the main battery when parked.
The split charge relay needs to be disconnected from power source when the engine is cranking
2015 Zforce 800, Dr Pulley weights and sliders, Dobeck EJK, Innovate Motorsports AFR gauge,
Custom exhaust outlet, Ramair foam air filter, Led light bars, Modified air intake, CRD a-arm guards
Go Up Pages1
User actions