0 Members and 1 Guest are viewing this topic.

*

Nighthawk

cage chop 800ex
« on: March 03, 2016, 08:25:36 AM »
I've seen lots of chopped stock rzr cages, has anyone done a zforce yet?
Planning to take 5" out of my rear, the 3 bars up top.

*

Nighthawk

Re: cage chop 800ex
« Reply #1 on: March 03, 2016, 08:27:12 AM »
And just to add, structural integrity will not be a problem as the shop that's going to be doing the job is very good.

*

Offline NMKawierider

Re: cage chop 800ex
« Reply #2 on: March 03, 2016, 11:17:39 AM »
I would like to do that too but don't have the ability to do it right. It needs cut down or at least the back raise flattened. There is a guy here that built his own extreme cage and did a great job.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Nighthawk

Re: cage chop 800ex
« Reply #3 on: March 03, 2016, 04:40:45 PM »
That's exactly what I'm doing. Flattening the back raised area.
I'm gonna cut 5" and see what it looks like. I don't think I'll get 6 out of it.

Then it will get lined up and taken to the shop

*

Offline NMKawierider

Re: cage chop 800ex
« Reply #4 on: March 03, 2016, 05:14:38 PM »
That's exactly what I'm doing. Flattening the back raised area.
I'm gonna cut 5" and see what it looks like. I don't think I'll get 6 out of it.

Then it will get lined up and taken to the shop

Probably have to make a new roof but how hard could that be. I sure would like to see it when done.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Hrc630

Re: cage chop 800ex
« Reply #5 on: March 03, 2016, 08:02:16 PM »
I want to make that in the next week. I will cut the tubing and put a beef up tube inside and weld it.
I think its really easy.
ZForce 800 53" 2015
Wet Clutch delete
CVTech Trail block
Two Brothers exhaust
Power Commander 5 with Autotune
Honda TRX450r front shocks
ELKA Stage 5 rear shocks
Custom doors
Mud fender
3" wheels spacer

*

Nighthawk

Re: cage chop 800ex
« Reply #6 on: March 04, 2016, 04:34:40 AM »
I'll take pics.
The roof should still attach.

*

Offline NMKawierider

Re: cage chop 800ex
« Reply #7 on: March 04, 2016, 08:35:35 AM »
I'll take pics.
The roof should still attach.

That would be great.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline ACIDICJO

Re: cage chop 800ex
« Reply #8 on: March 21, 2016, 10:12:30 PM »
Someone had posted a really cool cage/roof setup but I cant seem to find it anymore. I believe he said he got it off Facebook, and that it was posted by CFMoto Mexico. If anyone can find it please link it.
2014 ZForce 800 EX
14 in ITP Hurricane's
Sedona Mudder InLaws 30's
2 inch lift
24 inch light bar
2 cube lights
6 inch rear light bar
Wetsounds stealth 10 soundbar
BlueSea Fuseblock
2012 Polaris Rzr 800 all black
2005 Honda Rincon gone but not forgotten

*

Offline NMKawierider

Re: cage chop 800ex
« Reply #9 on: March 21, 2016, 10:26:31 PM »
Someone had posted a really cool cage/roof setup but I cant seem to find it anymore. I believe he said he got it off Facebook, and that it was posted by CFMoto Mexico. If anyone can find it please link it.

Is this it?

http://cfmoto-forum.com/buyer's-market/cf-new-accessories-for-zforce-800-limited-mexico/msg4952/#msg4952
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline Bish

Re: cage chop 800ex
« Reply #10 on: March 22, 2016, 05:18:24 AM »
Someone had posted a really cool cage/roof setup but I cant seem to find it anymore. I believe he said he got it off Facebook, and that it was posted by CFMoto Mexico. If anyone can find it please link it.

This link should take you to the Facebook Page:  www.facebook.com/cfmotomx/?fref=ts

*

Offline ACIDICJO

Re: cage chop 800ex
« Reply #11 on: March 22, 2016, 07:37:28 AM »
Yea that's it, thanks guys
2014 ZForce 800 EX
14 in ITP Hurricane's
Sedona Mudder InLaws 30's
2 inch lift
24 inch light bar
2 cube lights
6 inch rear light bar
Wetsounds stealth 10 soundbar
BlueSea Fuseblock
2012 Polaris Rzr 800 all black
2005 Honda Rincon gone but not forgotten

*

Offline bezerk1

Re: cage chop 800ex
« Reply #12 on: March 22, 2016, 02:24:57 PM »
I would pay some real money for that cage.

*

Offline NMKawierider

Re: cage chop 800ex
« Reply #13 on: March 22, 2016, 04:04:58 PM »
I would pay some real money for that cage.

Me too. :)

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

Re: cage chop 800ex
« Reply #14 on: March 22, 2016, 09:01:17 PM »
After I get some other things out of the way, I plan to make my own cage. I want to build it on a rail buggy kind of style.
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come