« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline flash

800 EX lift
« on: March 27, 2016, 09:26:32 AM »
Hey guys, who makes a lift for the 800 EX ? Or what are you guys using, I don't want a spring spacer, kinda like the way it rides now.
Logged
2015 800EX.     Bandit Shocks
Two Brothers.    EZ Steer power steering
UNIfilter
Dynojet
Super ATV half windshield
Rival front and rear bumpers
Super ATV high clearance A-arms
Custom rockslides
29 inch bighorns
Secondary clocked to C1
Конструктор doors
Custom roll cage
MTX Mudsys30 soundbar
Fuel bead locks
*

Offline drittal

Re: 800 EX lift
« Reply #1 on: March 27, 2016, 09:34:33 AM »
I'm interested too
Logged
*

Offline NMKawierider

Re: 800 EX lift
« Reply #2 on: March 27, 2016, 11:25:03 AM »
Some are using lifts for RzRs and modifying them.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline flash

Re: 800 EX lift
« Reply #3 on: March 27, 2016, 11:35:27 AM »
I don't mind modifying one if that's what it takes, do you know what model razer it it fits ?
Logged
2015 800EX.     Bandit Shocks
Two Brothers.    EZ Steer power steering
UNIfilter
Dynojet
Super ATV half windshield
Rival front and rear bumpers
Super ATV high clearance A-arms
Custom rockslides
29 inch bighorns
Secondary clocked to C1
Конструктор doors
Custom roll cage
MTX Mudsys30 soundbar
Fuel bead locks
*

Offline NMKawierider

Re: 800 EX lift
« Reply #4 on: March 27, 2016, 11:54:18 AM »
Someone will chime in with which one but do a search, there is a thread on it and what was used.
Logged
2015 Z Force 800 53/Trail EPS
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage |7- 9.7" GPS Systems | Bandit Springs Rear & Gen-3 Shocks Front | Cage Chop Mod

My Videos On YouTube
*

Offline Jason

Re: 800 EX lift
« Reply #5 on: March 27, 2016, 06:39:41 PM »
Not sure on a bracket lift, but I've got a SuperATV spring spacer kit still from when I had my ZForce.  I'd sell it for $80 plus shipping if there's anyone interested in it.
Logged
*

Offline Spaceman78

Re: 800 EX lift
« Reply #6 on: March 28, 2016, 07:34:36 PM »
I modified a RZR lift for mine. But, I don't have any idea what brand it is. My dad took it off of his 2008 RZR. It was already on there when he got it. It has no markings or stamping to identify it.
Logged
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come
*

Offline Spaceman78

Re: 800 EX lift
« Reply #7 on: March 28, 2016, 07:41:22 PM »
http://cfmoto-forum.com/800ex800/spaceman's-zforce-build!!!/
Here's a link to my thread with some pics.
Logged
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come
*

Offline ACIDICJO

Re: 800 EX lift
« Reply #8 on: March 28, 2016, 08:13:31 PM »
I'm running SuperATV's spring spacer lift and personally I like it, the ride didn't stiffen up nowhere near as bad as I thought it would.

I measured the ground clearance at the hitch receiver. Stock I was at 11.5 inches or ground clearance. The spacers got me up to 13.75 inches. I've since added some 30's mudder inlaws (with some serious cutting on the front fender flares) and now I'm just shy of 17 inches of ground clearance. Z8 looks amazing now  ;D
Logged
2014 ZForce 800 EX
14 in ITP Hurricane's
Sedona Mudder InLaws 30's
2 inch lift
24 inch light bar
2 cube lights
6 inch rear light bar
Wetsounds stealth 10 soundbar
BlueSea Fuseblock
2012 Polaris Rzr 800 all black
2005 Honda Rincon gone but not forgotten
*

Offline Spaceman78

Re: 800 EX lift
« Reply #9 on: March 29, 2016, 09:43:40 PM »
The Mudder-in-Laws must measure bigger than my Monster Mayhems. I didn't have any rubbing on my fenders before I put the lift on. I think with some minor trimming, I could fit 32s. My fronts are just 9" wide though. I really don't see the point in buying and installing spring spacers. You can do the same thing just by cranking up the pre-load. 2" is about max you get on these things. I just barely got my A-arms to drop down enough to get my shocks to bolt up with the lift.
Logged
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come
*

Offline Zing

Re: 800 EX lift
« Reply #10 on: June 14, 2016, 06:42:49 PM »
I'm interested to know if a wheel alignment is required after installing a lift kit or modifying the preload? 
Logged
*

Offline Spaceman78

Re: 800 EX lift
« Reply #11 on: June 16, 2016, 11:41:18 PM »
I didn't need to align mine.
Logged
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come
*

Offline Tcraig761

Re: 800 EX lift
« Reply #12 on: July 12, 2016, 10:55:03 PM »
Quote from: Jason on March 27, 2016, 06:39:41 PM
Not sure on a bracket lift, but I've got a SuperATV spring spacer kit still from when I had my ZForce.  I'd sell it for $80 plus shipping if there's anyone interested in it.

I may be interested
Logged
Pages: [1]   Go Up
« previous next »