0 Members and 1 Guest are viewing this topic.


Offline lynnedon

« on: November 07, 2016, 12:30:00 PM »
any ideas on why the temp guage would come all the way to hot but rad and hoses are cool     motor is not hot


Online NMKawierider

Re: overheating
« Reply #1 on: November 07, 2016, 12:42:35 PM »
Double check that the coolant is full and you do have flow first. If so then either the temp sensor is faulty or the lead to that sensor has a short..ie has grounded somewhere.
2015 Z Force 800 53/Trail EPS-
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube


Offline Cosmosdan

Re: overheating
« Reply #2 on: November 07, 2016, 08:31:07 PM »
If it has run for a bit the hoses should be pretty warm. If not you might have a flow problem.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet